Extended cooling zone, top4/bottom3 zones to make cooling rapidly and low outlet temperature.

 Enhance the main frame design and design rails in segments to ensure rails not get deformed, eliminate PCB stuck or dropping.

 Brandnew width adjust structure to ensure rails maintain the same from inlet to outlet, eliminate rails not parallel.

 Multi-layer temperature protection design to keep shell surface temperature low, which decrease working environment temperature.

 Double-layer temperature protection function to defend the damages to machine itself by abnormal temperature.

 New-type exhaust gas recovery structure to reduce energy consumption, and make flux recycle better.

 High thermal transmission makes soldering process easier and better on large and complicated products.

 Dual lanes with dual speed, with single machine price to make double productivity, save 60% energy.

 The furnace adopts a full enclosed design which is to prevent the N2 losing. The lowest Oxygen content 150ppm.

 

System	Item		ER-0803	ER-0803D	ER-1003	ER-1003D	ER-1203	ER-1203D
Size and power	1	Dimension（L*W*H） mm	5730*1426*1560	5730*1656*1560	6520*1426*1560	6520*1656*1560	7290*1426*1560	7290*1656*1560
	2	Exhaust volume	10m³/min*2( Channel)	10m³/min*2( Channel)	10m³/min*2( Channel)	10m³/min*2( Channel)	10m³/min*2( Channel)	10m³/min*2( Channel)
	3	Startup Power	30KW/32KW-N2	34KW/36KW-N2	34KW/36KW-N2	36KW/38KW-N2	38KW/40KW-N2	42KW/44KW-N2
	4	Normal Power Consumption	10-11KW	11-12KW	11-12KW	11.5-12.5KW	12-13KW	13-14KW
Heating System	5	No. of Heating zone	Top8 Bottom8	Top8 Bottom8	Top10 Bottom10	Top10 Bottom10	Top12 Bottom12	Top12 Bottom12
	6	Length of heating zone	3110mm	3110mm	3950mm	3950mm	4720mm	4720mm
	7	Warming Time	Approx.25min	Approx.30min	Approx.25min	Approx.30min	Approx.25min	Approx.30min
	8	Temperature Setting Range	Room temperature - 350 ℃
	9	Temperature Control Type	PID closed loop control, SSR driven
	10	Temperature Control Precision	±1℃
	11	Temperature difference in temperature Zones	Maximum 40 ℃
	12	Max. temp. Difference between Preheat Zones or Solder Zones	Maximum 80 ℃
	13	Temperature Deviation on PCB	±1.5℃
Cooling System	14	No. of cooling zone	3 (air oven Top 3 Bottom 3)
	15	Length of cooling zone	850mm	850mm	1200mm	1200mm	1200mm	1200mm
Transport System	16	Rail Structure	Integral segmented
	17	Chain Spec.	50-25 Standard Guide rail + standard double strand chain
	18	Rail Width Adjust Mode	By motorized + by Manual
	19	Max. PCB size	50-400mm	50-700mm/Dual 50-280mm	50-400mm	50-700mm/Dual 50-280mm	50-400mm	50-700mm/Dual 50-280mm
	20	Component Height	Top 30mm 下Bottom 30mm
	21	Conveyor Direction	L-R（R-L Option）
	22	Conveyor Height	900±20mm
	23	Conveyor Speed	300~2000mm/min
	24	Fixed Rail Side	Single lane： Front rail fixed（Rear rail fixed Option）  Dual lane： 1·4 fixed or 2·3 fixed option
N2 System	25	N2 Consumption	Option   Single lane：18-20m³/hr 300-1000PPM    Dual lane：25-30m³/hr 300-1000PPM
Electrical configuration System	26	Power Supply	3∮ 380V  50/60HZ  （3∮ 220V  50/60HZ subject to technical agreement）
	27	Alarm Display	By sound and light Yellow warming;Green normal;Red abnormal
	28	FLUX Service Hints	Software prompt maintenance cycle
	29	Data Storage	Process Data and Status Storage Unlimited
	30	UPS system	Standard configuration
	31		Option
	32		Option